At or near the surface
Grading, clearing, demolition, patching and finishing, mostly at the surface or just below it. The ground is shaped, not trenched.

Directional drilling, jack and bore crossings, pipe bursting and trenchless repair, vacuum excavation, 811 locating and camera surveys.
Directional drilling, jack and bore crossings, pipe bursting and trenchless repair, vacuum excavation, 811 locating and camera surveys.
C-01TrenchlessDirectional DrillingSteerable drilling that installs conduit and pressure pipe under driveways, roads, creeks, trees and landscaping with only small entry and exit pits.Trenchless bore
C-02TrenchlessJack & Bore CrossingsAuger boring under roads, rail and drives to push steel casing and carrier pipe in a straight line, with no road cut and tightly…Trenchless bore
C-03TrenchlessTrenchless Pipe RepairNo-dig repair for failing sewer and drain lines, including pipe lining and bursting, planned from a camera inspection and delivered with minimal digging.Trenchless bore
C-04TrenchlessPipe BurstingReplace old sewer and water lines with new pipe by pulling a bursting head through the old pipe, leaving the yard intact except for…Trenchless bore
C-05TrenchlessVacuum ExcavationNon-destructive digging with air or water and a vacuum truck to expose buried utilities safely, confirm depth and prevent line strikes.Shallow trench
C-06TrenchlessUtility Locating & 811Requesting locates, walking the marks, reviewing plans and mapping private lines so excavation starts with a clear picture of what is buried.Surface work
C-07TrenchlessCamera & Pre-Dig SurveysRecorded camera inspections of sewer and drain lines, with locating, to find defects, confirm routes and choose between lining, bursting and a targeted dig.Trenchless bore Every service page shows a depth gauge so you know what the ground will see.
Grading, clearing, demolition, patching and finishing, mostly at the surface or just below it. The ground is shaped, not trenched.
A typical utility trench for water, conduit, sewer laterals and drains, dug to the depth the utility or the code sets and closed in compacted lifts.
Basements, lift stations, fire lines and deep sewers. Deeper digs get sloped sides, shoring or a trench box, and a plan for water and spoil.
Directional drilling, jack and bore and pipe bursting work from small entry and exit pits, leaving the surface between them undisturbed.
Tell us what you are building, fixing or draining and we will suggest a site visit and a plan. The lines get located before the bucket moves.
Tell us what you are building, fixing or draining and we will reply with a suggested site visit and a plan. The lines get located before the bucket moves.
Prefer to talk? Call us(615) 393-6985