Land Clearing and Stump Removal in Nashville and Middle TN
Clearing of brush, trees and stumps for building sites, pastures, driveways and utility corridors, with debris hauled or processed.
- Excavation and Site Work
- At or near the surface
- Middle Tennessee
Land Clearing and Stump Removal, explained.
Before a lot can be graded or a trench dug, whatever is growing on it has to go. Brush, vines, small trees, large stumps and buried roots all get in the way of machines and hide what is underneath. Clearing turns a tangled lot into a surface that can be surveyed, graded and built.
We clear with excavators fitted with grapples and thumbs, remove stumps and roots, and sort, pile, haul or chip debris according to the site. Trees you want to keep are marked and protected, and we plan the work so soil is disturbed as little as the project allows.
Signs this service fits
- A wooded or overgrown lot is being prepared for building
- A driveway or utility corridor needs a cleared path
- A pasture or field needs reclaiming
- Storm damage has left trees and stumps
A good fit, and what to know.
We would rather you hear the limits from us than discover them later.
A good fit when
- A lot or corridor must be cleared before other work
- You want debris removed, not just pushed into a pile
- Erosion control is part of the plan
Worth knowing
- Large trees may need a tree service before the excavator
- Burning is regulated and often not allowed, so hauling or chipping is planned
Why do it this way.
Keeps what you choose
Protected trees stay protected.
Roots, not just stumps
Large roots are pulled so they do not heave or rot under a pad.
Debris handled
Hauling and processing are part of the plan.
Erosion-aware
Silt fence and stabilization are added where soil is exposed.
Before and after: overgrown to building pad
AfterBeforeIllustrative scene created to show a typical condition before and after the work. Drag the handle to slide between them.
From first look to finished ground.
A clear sequence for every job.
- 01
Mark what stays
Trees and features to keep are marked before any machine moves.
- 02
Clear and grub
Brush, trees and stumps are removed, and major roots are pulled.
- 03
Sort and process
Debris is piled, chipped, hauled or burned only where local rules allow.
- 04
Rough shape
The area is left graded enough to drain and to be surveyed.
Services that go together.
B-03ExcavationSite Grading & PadsCut-and-fill grading, pad building and rough grading for homes, shops, barns and commercial buildings, shaped for drainage and ready for the next trade.Surface work
B-13ExcavationErosion ControlSilt fence, wattles, construction entrances, matting and seeding to hold disturbed soil in place during and after construction.Surface work
B-10ExcavationDriveway & Road BaseExcavation, stone base and compaction for new driveways, farm roads and private roads, ready for gravel, asphalt or concrete.Surface work
B-08ExcavationDemolitionSelective and full demolition of sheds, garages, outbuildings, slabs and small structures, with sorting, hauling and site cleanup.Surface workRead more on this topic.
Tree Roots and Underground LinesWhy roots find pipes, how to protect lines and trees when digging and what to do when roots get in.2 min read 
New Construction vs Older Lots: Underground SurprisesThe different kinds of surprises you can meet on a new lot versus an old one.2 min read 
Questions to Ask an Excavation ContractorA checklist of questions that separate careful contractors from risky ones.2 min read Land Clearing FAQ.
Do you remove stumps and roots?
Yes. Stumps and the main roots are pulled or ground, depending on the plan for the area.
What happens to the trees and brush?
They can be hauled, chipped for mulch or processed on site where the rules allow. Open burning is restricted in many places, so we plan for removal.
Can you clear around trees I want to keep?
Yes. We mark them first, keep machines out of their root zones as much as possible and clear around them carefully.
Land Clearing across Middle Tennessee.
Pick your city for its page.
Call 811. Then call us.
Tell us what you are building, fixing or draining and we will suggest a site visit and a plan. The lines get located before the bucket moves.